Renkus-heinz ICL-R Bedienungsanleitung PDF herunterladen (Seite 42)

IC Live Users Manual - Models ICL-R & IC215S-R

Supervise Mode

RHAON’s Supervise mode is the one you will use most while your system is in operation (i.e., making sound). It is designed to empower

system operators with a comprehensive set of monitoring and loudspeaker/amplier management tools. In Supervise mode, you can

quickly detect a problem anywhere in the system and (if you have access to the appropriate Control mode functions) take corrective action.

To switch from Control Mode to Supervise Mode, click on the Supervise tab in either the main workspace, or in a Group or Loudspeaker

Properties window.

The main Supervise screen is similar to the Connect screen. It shows your system layout in icon form. The Status eld at the bottom of

each icon allows you to monitor all Loudspeakers or Groups at a glance. This eld will change color and display a text message that indi-

cates the status of the loudspeaker. If there is a problem with any loudspeaker in a Group, that Group’s icon will change color and display a

text alert.

In Supervise Mode, each Status Indicator will display one of the following colors and messages:

COLOR MESSAGE STATUS

GREEN OK This loudspeaker is (or all loudspeakers in this Group are) connected

and operating

YELLOW Overload Amplier is being over driven

RED Unassigned Virtual loudspeaker has not been assigned to a physical loudspeaker

RED Ofine Loudspeaker has lost power or been disconnected from the network

RED Driver Open One of the loudspeaker’s drivers has failed

RED Hot An amplier’s over temperature circuitry is engaged

RED Limiting An amplier is being over driven or is malfunctioning

RED Amp Fail An amplier has failed

If a Group icon displays an alert (yellow or red bar with text), double-click it to Expand it and show all of its Loudspeaker icons. One of

more of these icons will display the same alert: double-click it to open that loudspeaker’s Properties window in Supervise mode See below.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

Keine Kommentare

Renkus-heinz ICL-R Bedienungsanleitung Seite 42